The 30-yard is where home projects cross from a single-room job into a whole-property one. It is the box you rent when a 20-yard would mean a second haul, and it is the workhorse for renovations and new construction across the metro.
A 30-yard holds about 30 cubic yards, which works out to roughly nine to twelve loaded pickup beds. It is noticeably taller and longer than a 20-yard, so it carries the debris of an entire project rather than one or two rooms. The added height means more reach for a loader on a job site, and more capacity for the bulky, lower-density debris that piles up in a real renovation.
Picture every room of a house emptied at once, or a full home renovation that strips cabinets, drywall, flooring, trim, and fixtures across the whole floor plan. That is the volume a 30-yard is built for. It is the step you take when the job is clearly more than a 20-yard can finish, but the debris is still light enough that you are filling space rather than maxing out weight.
A 30-yard earns its place on projects that span a whole house or a full build phase. Whole-house clean-outs, major remodels, full home renovations, large estate cleanups, and new-construction framing and drywall debris all fit here. In the established subdivisions of Lee’s Summit, where original roofs and dated finished basements are getting redone, the 30-yard moves well for the bigger jobs.
| Project | Why a 30-yard fits |
|---|---|
| Whole-house clean-out | Every room of furniture and clutter in one drop |
| Major remodel or full renovation | Cabinets, drywall, trim, and flooring across a whole home |
| New-construction framing scrap | Lumber, drywall, and packaging from a build phase |
| Large estate cleanup | High volume of mixed household goods |
| Big landscaping overhaul | Bulky brush, sod, and removed plantings (light, not soil) |
On the Kansas side, the active new-construction in Olathe and the south-pushing tracts of Overland Park generate steady 30-yard framing and drywall loads. For a sensitive whole-home job, our estate cleanout guide covers volume planning and timing across multiple hauls.
A 30-yard usually runs $450 to $550 for a 7-day rental, against $350 to $450 for a 20-yard, so the step up is a modest difference. That gap is the whole reason to size up when a project is borderline. A second haul on a too-small 20-yard means paying another full flat rate, which costs far more than the bump from a 20 to a 30 in the first place.
The flat rate still covers drop-off, pickup, and disposal up to the included tonnage, with overage at the same posted per-ton rate of $50 to $90. Because a 30-yard is a high-volume box, the smart move is to fill the space, not the weight. If your debris is light and bulky, a 30-yard finishes a big job in one haul and keeps the cost predictable. Our cost-by-size guide lays the sizes side by side.
Keep heavy material out of a 30-yard, because weight, not volume, is what would bite you. Concrete, brick, dirt, and asphalt are so dense that a 30-yard would hit its tonnage cap when the box is barely a third full, leaving you with overage charges and a mostly empty container. That is the exact opposite of why you rent the big box.
Heavy debris belongs in a 10-yard filled only partway, where the smaller box keeps you under the weight the truck can legally haul. A 30-yard is for the light, voluminous debris of a real renovation or clean-out: drywall, lumber, furniture, packaging, and trim. Match the box to both the volume and the weight, and the 30-yard does exactly what it should. Our weight-limit guide explains the tonnage math in full.
A 30-yard holds about 30 cubic yards, roughly nine to twelve pickup-truck loads. It handles a whole-house clean-out, a major remodel or full home renovation, new-construction framing and drywall scrap, or a large estate cleanup that a 20-yard cannot finish. It usually runs $450 to $550 for a 7-day rental with drop-off, pickup, and disposal included up to the tonnage.
When the project runs across a whole house or a full renovation rather than one or two rooms. If you are clearing every room of a home, gutting a kitchen plus baths plus flooring, or framing a new build, a 20-yard usually fills before you finish. Stepping up to a 30-yard is cheaper than booking two 20-yards and paying two haul cycles.
A 30-yard for a 7-day rental usually runs $450 to $550, including drop-off, pickup, and disposal up to the included tonnage. Overage past the tonnage allowance usually runs $50 to $90 per ton, quoted before you book, and extra days past the 7-day window usually run about $10 to $20 per day.
Yes. A 30-yard is taller and longer than a 20-yard, so we confirm overhead clearance for power lines and tree limbs plus a level placement spot before the drop. On the larger suburban lots in Lee’s Summit and Olathe a driveway drop is usually fine, but tight inner-city lots may need a street spot and a permit.
Not as a heavy-only load. A 30-yard is built for high volume, so concrete, brick, or dirt would hit the weight cap when the box is barely a third full and risk an overage charge. Heavy material belongs in a 10-yard. A 30-yard is for the light, bulky debris of a big remodel or clean-out, not dense rubble.
For renovations, whole-home clean-outs, and framing scrap, the 30-yard finishes in one haul. We confirm clearance and placement, then quote the flat rate up front across the KC metro.
Last updated: May 28, 2026.
